Stainless steel 300 series

AISI 301 / AISI 302 | EN 1.4310 | DIN X10CrNi18-8 | 07Х16Н6 - is an austenitic stainless steel with good corrosion resistance and weldability. It has high strength and ductility.

AISI 301L is an improved version of AISI 301. The combination of strength and ductility allows this steel to withstand serious forming methods. Corrosion resistance comparable to

AISI 301LN | EN 1.4318 | DIN X2CrNiN18-7 - is an austenitic stainless steel similar to austenitic stainless steel grade AISI 301L with a high degree of hardness.

AISI 302B is an austenitic chromium-nickel stainless steel that has a resistance to scale at elevated temperatures that exceeds AISI 302 steel. It is used exclusively for parts

AISI 302Cu is a standard grade austenitic chromium-nickel stainless steel with copper added to its composition. It has a low hardening coefficient. It is recommended for use where

AISI 303 | EN 1.4305 | DIN X8CrNiS18-9 is an austenitic, corrosion-resistant stainless steel with the addition of sulfur to improve cutting properties (randomly machined steel).

AISI 303Cu | EN 1.4570 | DIN X6CrNiCuS18-9-2 is an austenitic chromium-nickel stainless steel containing copper. Due to its copper content, it provides good corrosion resistance

AISI 303Se | S30323 is a non-magnetic, austenitic stainless steel that is not heat treatable. It is free machinable, specifically designed to exhibit improved machinability.

AISI 304 | EN 1.4301 | DIN X5CrNi18-10 - This is a chromium-nickel austenitic steel. The presence of nickel in it in the amount of 8 - 10% leads to the fact that the austenitic

AISI 304Cu / EN 1.4567 / DIN X3CrNiCu18-9-4 is an austenitic stainless steel which is an austenitic chromium-nickel stainless steel with copper content. Except for the additional

AISI 304H | EN 1.4948 | DIN X6CrNi18-11 is an austenitic grade of stainless chromium-nickel steel with a higher carbon content, which provides it with increased tensile strength

AISI 304L | EN 1.4306 | EN 1.4307 | DIN X2CrNi19-11 is essentially a higher alloy version of EN 1.4307 | DIN X2CrNi18-9. Due to the higher chromium content and especially the

Stainless steel grade AISI 304LN / EN 1.4311 / DIN X2CrNiN18-10 is an austenitic stainless steel with the addition of nitrogen. In fact, it is a reinforced version of the

AISI 304N | S30451 - The stainless steel version of AISI 304 is strengthened by adding nitrogen to its composition. This means that when comparing the two grades, AISI 304N has a

Stainless steel AISI 305 | EN 1.4303 | DIN X4CrNi18-12 is a chromium-nickel austenitic stainless steel with a low degree of strain hardening due to the increased nickel content.

AISI 306 | EN 1.4361 | DIN X1CrNiSi18-15-4 is an austenitic stainless steel developed for primary forming into forged products. It is used for parts exposed to hot concentrated

AISI 307Si | EN 1.4370 | DIN X15CrNiMn18-8 is a superalloyed, fully austenitic stainless steel alloy. It is suitable for welding difficult to weld (martensitic, duplex)

AISI 308L | EN 1.4316 | DIN X1CrNi19-9 is a grade of stainless steel that is an austenitic stainless steel intended for welding (welding wire) and for primary molding into forged

AISI 309 | EN 1.4828 | DIN X15CrNiSi20-12 - is an austenitic high-alloy stainless steel with a large amount of chromium. It has very high corrosion resistance and strength than

AISI 309S | EN 1.4833 | DIN X12CrNi23-13 is an austenitic stainless steel that provides excellent corrosion resistance and heat resistance, as well as good strength at room