Magnetic stainless steel

AISI 416Se is a martensitic stainless steel that, due to the selenium (Se) and sulfur (S) content, provides better machinability than other similar stainless steels. However, this

AISI 418 | EN 1.4313 | DIN X3CrNiMo13-4 is a martensitic stainless steel designed for primary forming into forged products. The alloy has a relatively high base value among

AISI 420 | EN 1.4021 | DIN X20Cr13 is used in the hardened and tempered condition in many structural and fastening products where moderate corrosion resistance is required.

AISI 420 | EN 1.4028 | DIN X30Cr13 is used in the hardened and tempered condition in many structural and fastening products where moderate corrosion resistance is required. Due to

AISI 420 | EN 1.4034 | DIN X46Cr13 - is a martensitic stainless steel which has good polishing and mechanical properties but poor weldability. Due to its high carbon content, this

AISI 420F | EN 1.4029 | DIN X29CrS13 - is a martensitic alloy. The grade is identical to stainless steel AISI 420, but with the addition of sulfur to significantly improve

Stainless steel grade AISI 429 | EN 1.4001 | DIN X7Cr14 is a ferritic steel. It is also known as chromium steel UNS S42900. This steel has good corrosion resistance and its

AISI 430 | EN 1.4016 | DIN X6Cr17 - is one of many stainless ferritic chromium corrosion-resistant steels that is most widely used. It belongs to the group of general-purpose

AISI 430F | EN 1.4105 | DIN X6CrMoS17 and EN 1.4104 | DIN X14CrMoS17 are close in chemical composition and some properties to stainless steel grade AISI 430 (EN 1.4016). But there

AISI 430FSe is a ferritic stainless steel grade in which sulfur is replaced by selenium to improve machinability. A basic non-heat treatable stainless steel with 17% chromium,

AISI 430Nb | EN 1.4511 | DIN X3CrNb17 is a type of ferritic stainless steel of the AISI 430 type with the addition of niobium. Niobium provides better resistance to

Titanium stabilization gives AISI 430Ti | EN 1.4510 | DIN X3CrTi17 steel good resistance to intercrystalline corrosion. In addition, titanium also binds sulfur, which leads to

AISI 431 | EN 1.4057 | DIN X17CrNi16-2 is a rust- and acid-resistant martensitic chromium steel with the addition of nickel. The formation of chromium carbides and associated

AISI 434 | EN 1.4113 | DIN X6CrMo17-1 is a ferritic stainless steel, one of the most widely used ferritic stainless steels. The addition of molybdenum improves the overall

AISI 436 | EN 1.4526 | DIN X6CrMoNb17-1 is a ferritic stainless steel alloyed with molybdenum. It is an improvement of the AISI 434 grade with a small stabilizing additive of

Stainless steel AISI 439 | EN 1.4510 | DIN X3CrTi17 is a stabilized nickel-free grade. It is characterized by a high level of resistance to corrosion and oxidation, including sea

AISI 440A | EN 1.4109 | DIN X70CrMo15 is a martensitic stainless steel with a high carbon content (high carbon stainless steel) developed to provide properties for maximum

AISI 440B | EN 1.4112 | DIN X90CrMoV18 - martensitic stainless steel, belongs to high-carbon martensitic stainless steel. It is used for the production of stainless steel cuts,

AISI 440C | EN 1.4125 | DIN X105CrMo17 is a high-carbon martensitic stainless steel which, due to its high carbon, chromium and molybdenum content, has high strength, good

AISI 440F - belongs to the martensitic group of stainless steel. It is a high-carbon stainless steel that provides excellent machinability and corrosion resistance. It is one of