Non-magnetic stainless steel

AISI 304 | EN 1.4301 | DIN X5CrNi18-10 - This is a chromium-nickel austenitic steel. The presence of nickel in it in the amount of 8 - 10% leads to the fact that the austenitic

AISI 304Cu / EN 1.4567 / DIN X3CrNiCu18-9-4 is an austenitic stainless steel which is an austenitic chromium-nickel stainless steel with copper content. Except for the additional

AISI 304H | EN 1.4948 | DIN X6CrNi18-11 is an austenitic grade of stainless chromium-nickel steel with a higher carbon content, which provides it with increased tensile strength

AISI 304L | EN 1.4306 | EN 1.4307 | DIN X2CrNi19-11 is essentially a higher alloy version of EN 1.4307 | DIN X2CrNi18-9. Due to the higher chromium content and especially the

Stainless steel grade AISI 304LN / EN 1.4311 / DIN X2CrNiN18-10 is an austenitic stainless steel with the addition of nitrogen. In fact, it is a reinforced version of the

AISI 304N | S30451 - The stainless steel version of AISI 304 is strengthened by adding nitrogen to its composition. This means that when comparing the two grades, AISI 304N has a

Stainless steel AISI 305 | EN 1.4303 | DIN X4CrNi18-12 is a chromium-nickel austenitic stainless steel with a low degree of strain hardening due to the increased nickel content.

AISI 306 | EN 1.4361 | DIN X1CrNiSi18-15-4 is an austenitic stainless steel developed for primary forming into forged products. It is used for parts exposed to hot concentrated

AISI 307Si | EN 1.4370 | DIN X15CrNiMn18-8 is a superalloyed, fully austenitic stainless steel alloy. It is suitable for welding difficult to weld (martensitic, duplex)

AISI 308L | EN 1.4316 | DIN X1CrNi19-9 is a grade of stainless steel that is an austenitic stainless steel intended for welding (welding wire) and for primary molding into forged

AISI 309 | EN 1.4828 | DIN X15CrNiSi20-12 - is an austenitic high-alloy stainless steel with a large amount of chromium. It has very high corrosion resistance and strength than

AISI 309S | EN 1.4833 | DIN X12CrNi23-13 is an austenitic stainless steel that provides excellent corrosion resistance and heat resistance, as well as good strength at room

AISI 310S | EN 1.4845 | DIN X8CrNi25-21 | 20Х23Н18 - is a stainless steel that has high mechanical strength and impact toughness. It has excellent resistance to high-temperature

AISI 314 | EN 1.4841 | DIN X15CrNiSi25-20 - is an austenitic stainless steel that has excellent heat resistance characteristics (heat-resistant stainless steel) among

AISI 316 | EN 1.4401 | DIN X5CrNiMo17-12-2 is an acid-resistant austenitic stainless steel that is suitable for use in aggressive environments: phosphoric, nitric, citric, lactic,

AISI 316Cb | EN 1.4580 | DIN X6CrNiMoNb17-12-2 - is an austenitic chromium-nickel stainless steel alloy that provides excellent corrosion resistance and increased strength at

AISI 316F | S31620 is a low-carbon modification of the popular AISI 316 stainless steel grade. It contains iron, carbon, silicon, manganese, phosphorus, sulfur, chromium, nickel

AISI 316HMo | EN 1.4436 | DIN X3CrNiMo17-13-3 - austenitic stainless steel. This is an improved and refined version of grade 316L. The main difference between the grades is the

AISI 316L | EN 1.4435 | DIN X2CrNiMo18-14-3 is a modified austenitic stainless steel with extremely low silicon content and much higher molybdenum content. Low carbon content

AISI 316LN | EN 1.4429 | DIN X2CrNiMoN17-13-3 is an austenitic CrNi-molybdenum stainless steel. It has high stability and extremely low permeability. Its nitrogen content provides