Technical stainless steel

Technical

Technical stainless steel - is a stainless alloy that is not recommended for use in contact with drinking water and food products. When interacting, hazardous, harmful, toxic substances formed on the metal surface may be released into food and water. Such substances are formed due to the scanty amount or complete absence of such chemical elements as nickel, titanium, cobalt, molybdenum, etc. in the composition of technical stainless steel. These elements should prevent the formation of corrosion, oxidation, solubility, disintegration of steel when in contact with food, drinks, etc.

This type of steel mainly includes grades of the 400 series.

List of technical grades of stainless steel

List of stainless steel grades related to the technical type. To get detailed information about a specific grade, follow the link from the list.

Stainless Steel Grade AISI 410 | EN 1.4006 | DIN X12CrN13

AISI 410 | EN 1.4006 | DIN X12CrN13 - is a general-purpose martensitic stainless steel. It contains 11.5% chromium, which provides good corrosion resistance. However, the corrosion resistance of steels can be further improved by a number of processes, such as hardening, tempering and polishing. Hardening and tempering make it possible to strengthen the steel. Typically, such stainless steels are used in areas involving
...
Stainless Steel Grade AISI 420 | EN 1.4034 | DIN X46Cr13

AISI 420 | EN 1.4034 | DIN X46Cr13 - is a martensitic stainless steel which has good polishing and mechanical properties but poor weldability. Due to its high carbon content, this steel is very hard. It has good corrosion resistance in non-chloride environments and weak organic acids. Good resistance to water and steam. Not resistant to intergranular corrosion under as-welded or welded conditions. Due to the precipitation of
...
Stainless Steel Grade AISI 430 | EN 1.4016 | DIN X6Cr17

AISI 430 | EN 1.4016 | DIN X6Cr17 - is one of many stainless ferritic chromium corrosion-resistant steels that is most widely used. It belongs to the group of general-purpose stainless steels. It combines high strength and mechanical properties, high corrosion resistance, including atmospheric, excellent machinability, good plastic deformability, applicability to the processes of drawing, stamping, punching holes,
...