Non-magnetic stainless steel

AISI 201 | EN 1.4372 | DIN X8CrMnNi18-8 - stainless steel, belonging to the family of austenitic stainless steels. It is characterized by high strength, plasticity and rigidity. It has very low thermal conductivity. Products made of this grade of stainless steel can be used in a fairly wide range of temperatures. One of the advantages of the grade is its fairly high resistance to corrosion. Such steel can be in moderately

AISI 202 | EN 1.4373 | DIN X12CrMnNiN18-9-5 is a widely used grade of stainless steel that is characterized by high hardness, strength and good corrosion resistance. It is quite well processed in annealed condition. For complete transformation and heat treatment, the material must be heated to a temperature of 1038 °C for 30 minutes and then cooled to below 16 °C.

AISI 204Cu | EN 1.4597 | DIN X8CrMnCuNB17-8-3 - is a special type of stainless steel that is a chromium-magnesium austenitic stainless steel. Due to the addition of copper, the steel has better formability than AISI 201 and AISI 304 stainless steels. Copper improves corrosion resistance and increases resistance to stress corrosion cracking in certain environments. EN 1.4597 is somewhere between the prices of 200 and 300

AISI 301 / AISI 302 | EN 1.4310 | DIN X10CrNi18-8 | 07Х16Н6 - is an austenitic stainless steel with good corrosion resistance and weldability. It has high strength and ductility. It is very widely used in the production of springs as it is a high-strength stainless steel.

Due to its moderate carbon content, this grade of stainless steel is prone to

AISI 301L is an improved version of AISI 301. The combination of strength and ductility allows this steel to withstand serious forming methods. Corrosion resistance comparable to AISI 302.

AISI 301LN | EN 1.4318 | DIN X2CrNiN18-7 - is an austenitic stainless steel similar to austenitic stainless steel grade AISI 301L with a high degree of hardness.

AISI 304 | EN 1.4301 | DIN X5CrNi18-10 - This is a chromium-nickel austenitic steel. The presence of nickel in it in the amount of 8 - 10% leads to the fact that the austenitic phase is preserved at temperatures from low to 1050 ° C. The main advantage of this class of steel is its high service characteristics. It exhibits strength, plasticity, corrosion resistance in most working environments and has good processability.

Stainless steel grade AISI 304LN / EN 1.4311 / DIN X2CrNiN18-10 is an austenitic stainless steel with the addition of nitrogen. In fact, it is a reinforced version of the AISI 304

Stainless steel AISI 305 | EN 1.4303 | DIN X4CrNi18-12 is a chromium-nickel austenitic stainless steel with a low degree of strain hardening due to the increased nickel content. This alloy is well suited for multi-stage deep drawing without process annealing. The metal of this stainless steel is non-magnetic under annealing and cold working conditions and has corrosion resistance similar to stainless steel AISI 304, AISI

AISI 308L | EN 1.4316 | DIN X1CrNi19-9 is a grade of stainless steel that is an austenitic stainless steel intended for welding (welding wire) and for primary molding into forged products. Among forged austenitic stainless steels, it has moderately low tensile strength and moderately low ductility.

AISI 309 | EN 1.4828 | DIN X15CrNiSi20-12 - is an austenitic high-alloy stainless steel with a large amount of chromium. It has very high corrosion resistance and strength than other similar steels. In fact, it is a standard stainless steel that is used to make furnace parts and other high-temperature parts and components.

AISI 310S | EN 1.4845 | DIN X8CrNi25-21 | 20Х23Н18 - is a stainless steel that has high mechanical strength and impact toughness. It has excellent resistance to high-temperature oxidation due to the high content of chromium and nickel. And due to the low level of carbon, the release of carbides during welding or at high temperatures is reduced.

Stainless Steel Grade AISI 314 | EN 1.4841 | DIN X15CrNiSi25-20

---

AISI 314 | EN 1.4841 | DIN X15CrNiSi25-20 - is an austenitic stainless steel that has excellent heat resistance characteristics (heat-resistant stainless steel) among chromium-nickel steels. The silicon content in it improves oxidation and carburization resistance.