Instrumental stainless steel

M398 (BÖHLER M398 MICROCLEAN) - is a martensitic chromium steel produced by powder metallurgy. Due to its alloying concept, this stainless steel provides extremely high wear

N685 is a stainless martensitic chromium steel with a high carbon content, addition of molybdenum and vanadium. N685 steel is an excellent choice for those looking for a strong,

N690 is a cobalt-alloyed martensitic stainless steel produced by Böhler - Uddeholm AG. The steel has an original chemical composition that stands out from other grades of similar

N695 is a stainless martensitic chromium steel with a high carbon content and the addition of molybdenum. It has high hardness, wear resistance and good corrosion resistance. It

RWL-34 is a high-carbon stainless steel powder, additionally alloyed with molybdenum and vanadium. It has medium corrosion resistance. It is produced by the Swedish company

SG2 (SPG2, Super Gold 2) is a corrosion-resistant powder stainless steel with a fine-grained structure. Developed by the Japanese company Takefu in 1991 specifically for table and

AISI 420 | EN 1.4021 | DIN X20Cr13 is used in the hardened and tempered condition in many structural and fastening products where moderate corrosion resistance is required.

AISI 420 | EN 1.4028 | DIN X30Cr13 is used in the hardened and tempered condition in many structural and fastening products where moderate corrosion resistance is required. Due to

AISI 420 | EN 1.4034 | DIN X46Cr13 - is a martensitic stainless steel which has good polishing and mechanical properties but poor weldability. Due to its high carbon content, this

AISI 420F | EN 1.4029 | DIN X29CrS13 - is a martensitic alloy. The grade is identical to stainless steel AISI 420, but with the addition of sulfur to significantly improve

AISI 440A | EN 1.4109 | DIN X70CrMo15 is a martensitic stainless steel with a high carbon content (high carbon stainless steel) developed to provide properties for maximum

AISI 440B | EN 1.4112 | DIN X90CrMoV18 - martensitic stainless steel, belongs to high-carbon martensitic stainless steel. It is used for the production of stainless steel cuts,

AISI 440C | EN 1.4125 | DIN X105CrMo17 is a high-carbon martensitic stainless steel which, due to its high carbon, chromium and molybdenum content, has high strength, good

AISI 440F - belongs to the martensitic group of stainless steel. It is a high-carbon stainless steel that provides excellent machinability and corrosion resistance. It is one of

Super Gold STRIX (SPG STRIX) is a stainless powder steel that was created to strengthen the metal base material, which has both the machinability and ease of sharpening like

Vanax SuperClean (Vanax 37) is a stainless steel from the manufacturer Bohler-Uddeholm. Vanax SuperClean is a tool steel with a fine-grained structure. The material is produced by

VG-10 is a high-carbon corrosion-resistant stainless steel alloyed with cobalt and molybdenum. Specially developed by Takefu Special Steel Co., Ltd. (Japan) for the needs of the

ZDP-189 is a powder high-chromium, ultra-high-carbon tool stainless steel of the highest category, produced by Hitachi Metals Corporation (Japan). Developed on the basis of the